|
| The housing exhibition hall of Saitama Prefecture. It is a model house
new type. The inner wall is using HOTATE powder. A floor is the flooring
of a hinoki. Fittings do not use flash plywood but are Japan cedar material.
Thus, this house adheres to the natural material. I manufactured the dining
room table of this model house, the bench, and the tatami-room table. Please
inspect nearby one by all means. |
 |
| I do not have a big board. This time, the material was chosen by wood shop
Sekiguchi of Gumma Prefecture. Although this Japan cedar was a big plank
from the first, it has broken at the center. Since it was due to use, dividing
top of a tatami-room table, it is an exactly good material. |
 |
The plank of the Akita Japan cedar. Although there is 6cm of thickness,
there is curvature considerably. The result was set to 4.5cm. But thickness
exactly good for a dining room table. The price was cheap because of curvature
and a crack. |
 |
Akita Japan cedar dining room table & hinoki bench .
Although a dining room space is narrow, since there is no partition and
stairs are also open, there is a feeling of opening very much.
Akita Japan cedar table
width 800 length 1700 height 700
Hinoki bench
width 380 length 1700 height 410 |
 |
 |
(Triple-purpose ?) Japan cedar tatami-room table.
This tatami-room table can respond also to change of the decoration with
a model house.
Japan cedar tatami-room table
Width 900 length 2000 height 360&450
The top was taken as two boards. If a leg turns 90 degrees, it will become
different height. |
 |
Long version
When it shifts forward and backward, it is a long tatami-room table. Many
of the visitors can relax. |
 |
Decoration stand.
Such a combination will also be made if the height of a leg is changed.
When not using a tatami-room table, it can use on a decoration stand. |
|
